To Install:
1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already assembled).Remove any oil.lacquer,or dirt.Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on one side only).
2.Oil thread and point of set screws or thread and under head of cap screws.Place screws loosely in holes thatare threaded in hub one side see install bore.
3.Make sure bushing is free in hub.Slip assembly onto shaft and locatd in position desired.
4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,please refer to taper bushing screw torque which need to be asked.
5.If stall key,place it in the shaft keyway before install taper bushing.
6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.
Good Quality Manufacturng Steel Taper Lock Taper Lock Bush
Taper Lock Bush models as below:
1008,1108,1210,1215,1310,1610,1615,2012,2517,2525,3020,3030,
3535,4040,4545,5050,6050, 7060, 8060, 10085, 120100Taper lock bush features:1. Material: High grade cast iron GG25; Steel C452. Surface treatment: Black-phosphated or original color without finishing3. Easy on-easy off4. Machined to high precise tolerance5. A full range of both metric and imperial sizes taper bushes are available6. Complete short reach range available,
for compact lightweight assembliesWe are a leading supplier of Taper lock bushes in China and ISO9001:2008 certificated. Most of our Taper lock bushes are exported to Europe and North America. Excellent quality products with the most competitive price is guaranteedGood Quality Manufacturng Steel Taper Lock Taper Lock Bush
Audited Supplier 
){kind=link}